Semi-Automatic Paint Line with an Overhead Conveyor for JSC “Ekvator Plant”

semi automatic paint line with an overhead conveyor

Painting and Drying System with Conveyor | TWEKO

In August 2025, with the support of the Federation of Employers of Ukraine, the management of JSC “Ekvator Plant” approached TWEKO with the task of restoring the company’s destroyed semi-automatic paint line. The TWEKO team manufactured an FSC series painting and drying system (FSC) with an integrated overhead load-carrying conveyor. The system combines separate painting and drying zones, handling of workpieces weighing up to 1 tonne, multi-stage dry filtration, ventilation with an airflow capacity of up to 20,000 m³/h, and electric heating with a drying temperature of up to +80 °C.

About the Client

JSC “Ekvator Plant” is a mechanical engineering company based in Mykolaiv, specialising in the development and manufacture of climate control equipment. Its core product range includes ventilation and air conditioning systems, fans, heat exchangers and air distribution components for ships, naval vessels and other industrial facilities.

Implemented Solution

The objective was to restore the company’s painting operations to modern technological standards and integrate painting, drying and workpiece handling into a single process. The solution was based on an FSC series painting and drying system with separate painting and drying zones and an integrated overhead load-carrying conveyor.

The internal dimensions of the paint spray booth are 5,000 × 4,000 × 2,600 mm, while those of the drying booth are 4,100 × 4,000 × 2,600 mm. The overall external dimensions of the system are 9,340 × 6,561 × 3,580 mm. The system is equipped with two personnel doors and three access gates.

Assembly drawing of the FSC painting and drying system for JSC Ekvator Plant

Overhead Load-Carrying Conveyor

An overhead chain conveyor with a traction chain pitch of 100 mm was installed to transfer workpieces sequentially between the processing zones. The closed-loop conveyor track is constructed from I-beams and incorporates a traction chain, idle trolleys and load-carrying trolleys paired by crossbeams, horizontal bends, a drive and tensioning mechanism, and thermal expansion joints.

Overhead load-carrying conveyor of the paint line for JSC Ekvator Plant

Each workpiece is suspended from two trolleys connected by a crossbeam, with a combined load capacity of up to 1,000 kg. The load spacing is 1,200 mm, the conveyor speed is up to 1 m/min, and the approximate conveyor length is 30 m. The operating track height is 2.7 m, with approximate workpiece dimensions of up to 2.0 × 1.0 m.

The conveyor is designed to operate at temperatures of up to +120 °C. The operator can start and stop the conveyor using a control button, coordinating workpiece movement with the painting and drying processes.

Detail of the TWEKO painting and drying system with an overhead conveyor

Ventilation, Filtration and Control

The air balance is maintained by supply and exhaust ventilation units and a separate air recirculation circuit for drying mode. The supply airflow capacity is up to 20,000 m³/h, and a multi-stage dry filtration system is used for air treatment.

In spraying mode, the air is pre-filtered, heated, passed through fine ceiling filters and supplied to the working zone. Air containing paint overspray particles passes through wall filters and is extracted by the exhaust fan. A positive pressure of 10–30 Pa is maintained inside the booth.

In drying mode, the system switches to air recirculation: the air passes through the heating and ventilation unit and heat exchanger, is heated and returned to the working zone. The maximum drying temperature is +80 °C.

Operating modes are controlled via an electrical control panel. The operator sets the drying temperature and duration, controls the lighting and starts the required cycle. The system monitors the operation of the fans and heating elements and incorporates emergency protection functions.

Technical Specifications

Overall Dimensions
Internal dimensions of the paint spray booth 5,000 × 4,000 × 2,600 mm
Internal dimensions of the drying booth 4,100 × 4,000 × 2,600 mm
Overall external dimensions of the system 9,340 × 6,561 × 3,580 mm
Personnel doors 2 units, 840 × 1,975 mm
Access gates 3 units, 2,360 × 2,000 mm
Booth equipment weight 5,800 kg
Ventilation and Filtration
Supply airflow capacity Up to 20,000 m³/h
Filtration system Multi-stage dry filtration
Operating positive pressure 10–30 Pa
Heating and Drying
Heating type Electric tubular heating elements
Maximum drying temperature Up to +80 °C
Drying mode Air recirculation
Lighting
Lighting type T8 LED lamps
Number of lamps 24 units
Power per lamp 18 W
Power Supply and Noise Levels
Power supply 380 V / 50 Hz
Total power consumption Up to 178 kW
Noise level inside the booth 65 dB
Noise level outside the booth 70 dB
Overhead Load-Carrying Conveyor
Traction chain pitch 100 mm
Load spacing 1,200 mm
Combined load capacity of two trolleys Up to 1,000 kg
Conveyor speed Up to 1 m/min
Approximate conveyor length 30 m
Operating height 2.7 m
Approximate workpiece dimensions 2.0 × 1.0 m

Result

A semi-automatic paint line based on the FSC series painting and drying system with an overhead conveyor capable of handling loads of up to 1,000 kg was implemented for JSC “Ekvator Plant”. Painting, drying and workpiece handling were integrated into a single technological process.

Planning to upgrade or install a paint line with a conveyor system? Provide us with your workpiece dimensions and weight, required production capacity and workshop layout — we will develop a suitable equipment configuration and prepare a quotation.

You will also be interested in