Automotive paint spray booth: AKFS Standart series

Automotive paint spray booth: AKFS Standart series

Pre-order

The AKFS Standart series is precision synchronized equipment that creates the perfect microclimate. For safe fast and high-quality application of paintwork. It embodies modern technological solutions for a car service workshop. Increases the effectiveness of paint work.

Product type:	Spray booths Painting chamber
Series:	AKFS Standart
Industry:	For car service
Type of installation:	On a special foundation

Price: from 20010 USD

Automotive paint spray booth (Painting and drying chamber: AKFS Standart series) – a solution for increasing the productivity of paint work, for car service workshops. Long-lasting reliable design. Heated air using a diesel or gas burner. It is installed on a special foundation with ventilation ducts.

TO CAR WORKSHOPS

For primers, paints, enamel and varnishes

The perimeter of the working area is illuminated by energy-saving powerful LED lamps. The temperature is regulated from the control panel (within 16-24 ° C during the painting process and 20-80 ° C during the drying process). Powerful exhaust system, provides a constant stream of clean, warm air. The spray booth is equipped with an entrance gate and a door for staff.

Conform to international safety standards

Equipped with automatic fire extinguishing system;
Made of non-combustible materials;
Eradication of fans and main elements of the ventilation system;
Automatic safety locking system – eliminates the possibility of supply of paint or compressed air to the spray devices, in the event of termination of ventilation.

Automotive spray paint booth (Painting and drying chamber)

Equipment Configuration of AKFS Standart Series Chambers

For basic configuration*

Component	Quantity
Structure
Set of Wall Panels, 60 mm Thick	1 set
Roller Shutter Gates	1 unit
Personnel Service Door	1 unit
Ceiling Structure with Set of Ceiling Filter Frames	1 set
Set of Floor Grates, Maximum Load 600 kg/wheel	1 set
Lighting
Set of Ceiling Lights, LED T8 1200 mm, 4×18 W	8 units
Heating System
Diesel or Gas Burner	1 unit
4-Way Stainless Steel Heat Exchanger	1 unit
Electric Heat Exchanger (Alternative to Burner)	1 set
Ventilation
Centrifugal Supply Ventilation Unit with Electric Motor	1 unit
Centrifugal Exhaust Ventilation Unit with Electric Motor	1 unit
Pneumatic Damper Device	1 set
Manual Air Pressure Adjustment Damper for Chamber Cabin	1 unit
Frequency Converter for Exhaust Ventilation Unit	1 unit
Filtration
Set of Exhaust, Supply, and Pre-Filters	1 set
Set of Exhaust Filter Frames	1 set
Control and Monitoring
Control Panel with Automation and Monitoring Systems	1 unit
Pressure Gauge for Monitoring Cabin Pressure	1 unit
Thermostat	1 unit
Operating Hours Counter	1 unit
Timer for Drying Time Control	1 unit
Programmable Logic Controller	1 unit

* Configuration is designed for the basic setup. Components may vary depending on specific requirements.

Technical Specifications of AKFS Standart Series Chambers

For basic configuration*

Parameter	AKFS-S-7	AKFS-S-9
Dimensions
External Chamber Dimensions (LxWxH)	7.1 × 5.3 × 3.2 m	8.7 × 5.8 × 3.5 m
Internal Working Zone Dimensions (LxWxH)	7 × 4 × 2.7 m	8.6 × 4.5 × 3 m
Entry Gates (WxH)	2800 × 2600 mm	3000 × 2800 mm
Personnel Door (WxH)	650 × 1900 mm	650 × 2000 mm
Performance
Air Flow Rate	22000 m³/h	27000 m³/h
Air Flow Velocity Inside Chamber with Product	0.25 m/s	0.23 m/s
Air Temperature (Set by Operator)	16–80 °C	16–80 °C
Ventilation
Exhaust Ventilation Unit Power	5.5 kW	7.5 kW
Supply Ventilation Unit Power	7.5 kW	11 kW
Thermal Power
Diesel Burner Thermal Power	80–200 kW	115–310 kW
Gas Burner Thermal Power	85–200 kW	95–300 kW
Diesel Fuel Consumption	7–13 kg/h*	9.6–26 kg/h*
Natural Gas Consumption	6.4–18 m³/h*	10–32 m³/h*
Electric Heat Exchanger Power Consumption	36–120 kW/h*	45–150 kW/h*
Floor
Maximum Load on Floor Grates	600 kg/wheel	600 kg/wheel
Electricity
Total Power Consumption (Excluding Electric Heat Exchanger)	13.2 kW	18.8 kW
Power Supply	3 phases, 380 V, 50 Hz	3 phases, 380 V, 50 Hz

* Specifications are calculated for the basic configuration. Chamber performance significantly increases with the use of optional auxiliary components.
** External chamber dimensions depend on the type and placement of the ventilation unit.
*** AKFS Standart series chambers are equipped with a gas or diesel burner (customer’s choice). Fuel consumption depends on external air temperature. An electric heat exchanger is an alternative to the burner.